banner



Home  ›  How To Adobe Photoshop Halo Effect

How To Adobe Photoshop Halo Effect

Written By Friday, June 10, 2022 Add Comment Edit

In this tutorial y'all will learn how to turn your ordinary photos into amazing, spooky photos.

I will explicate everything in and then much particular that anybody can create it, even those who take just opened Photoshop for the kickoff time.

The issue shown above is the one I volition show you how to create hither in this tutorial. If you would similar to create more advanced and creepy photograph effects, as shown below, only using a single click and in just a few minutes, then cheque out my Halloween Photoshop Action. Y'all tin can also purchase this as part of a package on GraphicRiver.

Action final results Action final results Action final results

What You'll Need

To recreate the pattern higher up, you lot will demand the following photo:

  • Stock Image

1. How to Become Started

Step i

First, open the photo that you want to work with. To open your photograph, go to File > Open up, choose your photograph, and click Open. Now, before nosotros go started, just check a couple of things:

  1. Your photo should be in RGB Color mode, 8 Bits/Channel. To bank check this, go to Prototype > Manner.
  2. For all-time results, your photo size should be 2000–4000 px broad/high. To check this, go to Image > Paradigm Size.
  3. Your photograph should be theBackground layer. If information technology is not, get to Layer > New > Groundwork from Layer.
Checking image size and mode Checking image size and mode Checking image size and mode

Stride 2

Now we demand to aggrandize the canvas a picayune bit on the top so we have more space effectually the discipline on this side. Go to Paradigm > Canvass Size and use the settings below:

Expanding canvas Expanding canvas Expanding canvas

Step 3

Nosotros are going to exercise the aforementioned thing for the correct side of the sheet. Go to Epitome > Sail Size and utilise the settings below:

Expanding canvas Expanding canvas Expanding canvas

two. How to Select the Subject

Step 1

In this section we are going to brand a selection of our bailiwick and then copy the subject field to a separate layer. Choose the Quick Selection Tool (W), and select the background of the photo. Use theShift-Altbuttons on your keyboard to add together or subtract some areas from the selection. Afterward you make a perfect selection, press Command-Shift-I on your keyboard to capsize the selection.

Making a selection of the subject Making a selection of the subject Making a selection of the subject

Step ii

At present go to Select > Modify > Contract, set the Contract By to 2 px, then go to Select > Modify > Plumage and set the Plume Radius to 2 px as shown below:

Modifying selection Modifying selection Modifying selection

Step iii

Press Command-J on your keyboard to create a new layer using the choice, and proper noun this new layer Subject.

Creating a new layer using selection Creating a new layer using selection Creating a new layer using selection

iii. How to Create the Background and Textures

Step i

In this section nosotros are going to create the background and too some textures. Select the Groundwork layer, get to Layer > New Fill Layer > Solid Color to create a new solid colour fill layer, proper name it Background Color, and choose the color#000000 as shown below:

Creating new solid color fill layer Creating new solid color fill layer Creating new solid color fill layer

Pace 2

Now go to Layer > New > Layer to create a new layer and name information technology Background Texture.

Creating a new layer Creating a new layer Creating a new layer

Pace 3

Press D on your keyboard to reset the swatches and become to Filter > Render > Clouds.

Adding clouds filter Adding clouds filter Adding clouds filter

Step four

Now press Command-T on your keyboard to transform this layer and set the Width and Height to 200% as shown below:

Transforming the layer Transforming the layer Transforming the layer

Pace 5

Go to Prototype > Adjustments > Levels and enter the settings beneath:

Adjusting levels Adjusting levels Adjusting levels

Step half-dozen

At present ready the Opacity of this layer to 45%.

Changing the opacity Changing the opacity Changing the opacity

Step 7

Select the Subject layer, go to Layer > New > Layer to create a new layer and name it Foreground Texture.

Creating a new layer Creating a new layer Creating a new layer

Pace eight

At present printing D on your keyboard to reset the swatches and become to Filter > Render > Clouds.

Adding clouds filter Adding clouds filter Adding clouds filter

Step 9

Printing Control-T on your keyboard to transform this layer and set the Width and Height to 150% as shown beneath:

Transforming the layer Transforming the layer Transforming the layer

Step 10

Now change the Blending Modeof this layer to Screen and set the Opacity to 42%.

Changing the blending mode and opacity Changing the blending mode and opacity Changing the blending mode and opacity

4. How to Alloy the Subject field

Step 1

In this section we are going to brand the subject blend well with the groundwork. Select the Bailiwick layer, go to Layer > New Aligning Layer > Hue/Saturation to create a new hue/saturation adjustment layer, and proper name it Subject_Saturation.

Creating huesaturation adjustment layer Creating huesaturation adjustment layer Creating huesaturation adjustment layer

Step 2

Double-click on this layer thumbnail and, in theProperties console, set the Saturation to -80 every bit shown below:

Adjusting saturation Adjusting saturation Adjusting saturation

Pace 3

Now press Command-Alt-G on your keyboard to create a clipping mask. And so select the Bailiwick layer, Control-click on its thumbnail to make a choice of this layer, and become to Layer > Layer Mask > Reveal Choice to add together a layer mask that reveals the selected surface area of the layer.

Adding layer mask Adding layer mask Adding layer mask

Step 4

While this layer mask is selected, press D on your keyboard to reset the swatches and then X to commutation them. Subsequently that, cull the Brush Tool (B), pick a soft brush, and start brushing over the edges of the subject area that are not composite well with the background.

Brushing into layer mask Brushing into layer mask Brushing into layer mask

Pace 5

Now Control-click on the Subject_Saturation layer to become both layers selected at the same time, get to Layer > New > Group from Layers to create a new group from the selected layers, and proper name it Chief Bailiwick.

Creating a new group from layers Creating a new group from layers Creating a new group from layers

Step 6

Get to Layer > Layer Mask > Reveal All to add together a blank layer mask to this layer. Then printing D on your keyboard to reset the swatches and and so X to exchange them. After that, choose the Brush Tool (B), choice a soft brush, and brush over the bottom part of the subject to make it fade into a texture.

Brushing into layer mask Brushing into layer mask Brushing into layer mask

Step vii

Now gear up the Opacity of the Brush Tool (B) to 26% and castor over the edge of the area y'all brushed previously to shine the transition between the bailiwick and the texture.

Brushing into layer mask Brushing into layer mask Brushing into layer mask

5. How to Create the Lighting

Step 1

In this section we are going to work on the lighting. Select the Foreground Texture layer, get to Layer > New Fill Layer > Gradient to create a new slope fill layer, name it Light Source, set the Style to Radial, and use the other settings shown below:

Creating new gradient fill layer Creating new gradient fill layer Creating new gradient fill layer

Step 2

At present Double-click on this layer thumbnail, choose the Movement Tool (V) and click and drag anywhere within the canvas to position the light source equally below, and choose OK.

Positioning light source Positioning light source Positioning light source

Stride 3

Alter the Blending Way of this layer to Screen and gear up the Opacity to 17%.

Changing the blending mode and opacity Changing the blending mode and opacity Changing the blending mode and opacity

Step iv

Now select the Foreground Texture layer, get to Layer > New > Layer to create a new layer, and name it Darken Background.

Creating a new layer Creating a new layer Creating a new layer

Pace 5

Go to Edit > Fill up and set the Contents to Foreground Colour, the Mode to Normal, and the Opacity to 100% as shown below:

Filling layer with foreground color Filling layer with foreground color Filling layer with foreground color

Pace half-dozen

Now change the Blending Mode of this layer to Soft Light, then select the Light Source layer and press Command-J on your keyboard to duplicate it.

Changing the blending mode Changing the blending mode Changing the blending mode

Step 7

Right-click on this layer and choose Rasterize Layer to rasterize it. Then Command-click on this layer thumbnail to make a selection of information technology, select the Darken Background layer, and get to Layer > Layer Mask > Hide Selection to add a layer mask that hides the selected area of the layer. After that, Right-click on the Lite Source copy layer and choose Delete Layer to delete it.

Adding layer mask Adding layer mask Adding layer mask

Pace eight

Now go to Layer > New > Layer to create a new layer and proper name it Darken Edges.

Creating a new layer Creating a new layer Creating a new layer

Footstep 9

Become to Edit > Fill and fix the Contents to Foreground Colour, the Mode to Normal, and the Opacity to 100%, as shown below:

Filling layer with foreground color Filling layer with foreground color Filling layer with foreground color

Step x

Now press Control-A on your keyboard to brand a choice of the canvas and get to Layer > Layer Mask > Hide Choice to add together a layer mask that hides the selected area of the layer. Then click on the link icon between the layer thumbnail and mask to unlink them, press Control-T to transform the layer mask, and gear up the Width and Superlative to 85% every bit shown beneath:

Adding and transforming layer mask Adding and transforming layer mask Adding and transforming layer mask

Pace 11

Go to Filter > Blur > Gaussian Blur and set the Radius to 200 px equally shown below:

Adding gaussian blur filter Adding gaussian blur filter Adding gaussian blur filter

6. How to Make the Final Adjustments

Footstep 1

In this section we are going to make final adjustments to our result. Printing D on your keyboard to reset the swatches, go to Layer > New Adjustment Layer > Slope Map to create a new slope map aligning layer, and proper noun it Overall Contrast.

Creating gradient map adjustment layer Creating gradient map adjustment layer Creating gradient map adjustment layer

Step 2

Change the Blending Mode of this layer to Soft Light and set the Opacity to 39%.

Changing the blending mode and opacity Changing the blending mode and opacity Changing the blending mode and opacity

Stride 3

Now become to Layer > New Adjustment Layer > Curves to create a new curves adjustment layer and name it Color Look.

Creating new curves adjustment layer Creating new curves adjustment layer Creating new curves adjustment layer

Pace 4

Double-click on this layer thumbnail and, in the Properties panel, use the settings below:

Adjusting curves Adjusting curves Adjusting curves

Footstep five

Now press Control-Alt-Shift-E on your keyboard to make a snapshot, and then press Control-Shift-U to desaturate this layer. After that, get to Filter > Other > Loftier Pass and set the Radius to ii px equally shown below:

Adding high pass filter Adding high pass filter Adding high pass filter

Step 6

Proper name this layer Overall Sharpening and change the Blending Fashion to Hard Calorie-free.

Changing the name and blending mode Changing the name and blending mode Changing the name and blending mode

You lot Fabricated Information technology!

Congratulations, you lot take succeeded! Here is our concluding result:

Final result Final result Final result

If you would like to create more avant-garde and creepy photograph effects as shown below, only using a single click and in just a few minutes, then check out my Halloween Photoshop Activity. You can also purchase this as part of a bundle on GraphicRiver.

Action final results Action final results Action final results

Source: https://design.tutsplus.com/tutorials/how-to-create-a-spooky-photo-effect-action-in-adobe-photoshop--cms-29709

Posted by: changdeforgand.blogspot.com

0 Response to "How To Adobe Photoshop Halo Effect"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel